• Aurora Blades Mac Os Download
• Aurora Blades Mac Os X
• Aurora Blades Mac Os 11

'For those seeking playback capabilities for multiple types of video media, including Blu-ray, Aurora Blu-ray Player for Mac is simple to use and plays videos well.' By Ben Markton on May 02, 2014 Aurora Blu-ray Media Player lets you play files from a disk or from your hard drive. Full working macOS for DELL Alienware Aurora R6/R7/R8/R9/R10/R11 (with Intel Processors). If you have any problem or improvement, you are weclome to share it through submitting an issue. My machine: Aurora R7 with i7-8700, 32GB memory, RX 580, 1TB nvme ssd, DW1830 wifi+bluetooth card.

Propagation Mail List Reflectors -- Several to choose from includes Subscription Info

GROUND WAVE, LINE OF SIGHT

GroundWave Propagation and Distances -- Via G3CIW

Guide ToTransmitter Range Via Artsci

Calculatingthe Distance To The Horizon

Radio Mobile -- Predict the performance of a radiosystem -- From VE2DBE

HF PROPAGATION

Propagation Primer -- Excellent From AE4RV

W6ELProp™-- By Sheldon C. Shallon, W6EL - predicts ionospheric (sky-wave) propagationbetween any two locations on the earth on frequencies between 3 and 30 MHz. YOUHAVE TO HAVE THIS ONE -- HAMS OR SWLers

ON5AUPropagation and Antenna Site -- Loaded with good info and graphs

D-Region Absorption Prediction- From The NOAA/Space Environment Center

ExcellentPropagation Info -- By Geoffrey Noles, AE4RV

Radio Propagation -- from Your Remote S-Meter pages

LONG PATH PROPAGATION

LongPath HF Radio Propagation By Norm Styer - AI2C

VHF/UHF PROPAGATION

ARRLPropagation Classifications for VHF/UHF -- Propagation modes aretropospheric refraction and ducting (including line-of-sight paths), dividedinto in three categories:
Tropo (A) (tropospheric modes across the Atlantic, Caribbean, and Gulf ofMexico);
Tropo (C) (tropospheric modes across continental North America;
Tropo (P) (tropospheric modes across the Pacific);
Aurora (auroral scatter);
Auroral E (auroral E);
Sporadic E (sporadic E);
FAI (E-layer field-aligned irregularities;
IFS (ionospheric forward scatter);
Meteors (meteor scatter);
TE (transequatorial field-aligned irregularities);
Rain scatter (precipitation scatter).

VHF/UHFPropagation -- Excellent Info, Sporadic E, Tropo, Backscatter, MeteorScatter, Aurora, F2 Skip, more

Hawaii Tropo Ducting -- VHF AndAbove World Records

Flash slot machine. Non-Ducting Tropo Propagation -- From M1BWR

PROPAGATION SUMMARIES, CHARTS, SOLAR FLUX REPORTS

DXSherlock 1.4 VHF-UHF Including Six Meters -- QSO Real Time Maps

WM7DPropagation Summary -- SFI A and K, Solar Cycle Graph, more

NM5KPropagation Summary -- Current Solar-Terrestrial Conditions

QST HF Propagation Prediction Charts -- MUF, Best Propagation Paths and Times -- PDF Files -- From the ARRL

Solar Flux Graphs --By WN6K, Paul

Latest Solar Report -- Nice Chartsand Graphs - From DXLC, Jan Alvestad

LatestSolar Report -- Updated every 5 minutes -- From NOAA Space Environment Center

Space Weather Now - Geomagnetic Storms;Solar Radiation Storms; Radio Blackouts; Latest Alert, Warning, or Watch; SolarCycle Progression and much much more on Ol Sol

Solar Activity -- Excellent From Dan, W3DF

27 Day HF Propagation Prediction Chart -- From Paul, AA1LL

PROPAGATION -- Hottest new propagation page on the web. Contains many indicies and reports that are dynamically updated as soon as new information is available. -- From QSL.NET

Propagation Studies Committee - RSGB -- By Martin Harrison G3USF

IPS Support for HF Radio World Wide -- From Australia

SpaceWeather.com - Agoodie on ol sol

Skywave Technologies -- Propagation Tutorial & Programs

Radio Propagation Conditions From Ham Radio On-Line

Propagation Forecast By AD5Q. -- No Longer Active -- But has 11 Years of Monthly Propagation Reports

Solar Flux Graphs -- from The CT1BOH Web Site

Solar Terrestrial Activity Report -- By Jan Alvestad -- Recent solar and geomagnetic data (updated daily); Solar WIND and electron fluence charts (updated daily); Solar cycles 21-23, [Solar cycles 1-20; Graphical comparison of cycles 21, 22 and 23

LONG DELAYED ECHO

MoreOn LDE -- From THE WAYBACK MACHINE #31 by Bill Continelli,W2XOY

Mysticaldelayed radio signals -- Received in Oslo

PROPAGATION PRIMER AND TUTORIALS

Propagation Primer -- Excellent From AE4RV

PropagationGlossary -- From The Basics of Radio Wave Propagation Pages

Propagation Topics -- Via The Space Environment Center -- Includes a GLOSSARY OF SOLAR-TERRESTRIALTERMS

THE PROPAGATION SOFTWARE PAGES

54 HF Propagation Prediction Programs Reviewed -- From Luxorion -- HomePage

ACE-HF-- Professional Propagation Software for HF Radio Operators

DX Toolbox -- From BlackCat Systems -- searches the web for you, gathering information on solar and geomagnetic conditions that affect radio propagation. It also features several propagation forecasting tools. Any video converter ultimate 6 2 09. It's ideal for the ham radio operator, shortwave listener, or other radio enthusiast, and is available for Mac OS, Mac OS X, and Windows.

HamCap --- (by Alex VE3NEA) is a compact freeware interface program to VOACAP, incorporating both graphical Point-to-Point and Area Coverage predictions. Also seeHamCAP and Type 13 & 14 Antennas

High Frequency Propagation Models -- U.S. Department of Commerce NTIA/ITS -- About a dozen or so to choose from

IONSOUND HDX or TURBO From Skywave Technolgies

Kangaroo Tabor Software -- WinCAP Wizard, CAPMan, Active Beacon Wizard -- Propagation and Beacon Programs

KU5S -- Communications Analysis Prediction Wizard

MultiNEC2.0 -- -- Automate and animate your antenna modeling and propagation
predictions -- From AC6LA

PropGate - Propagation over line-of-sight and multi-hop ionospheric paths. Path loss, field strength and S-meter readings. Free From Reg, G4FGQ

Aurora Blades Mac Os Download

PropView uses the included IonCap propagation prediction engine to forecastthe minimum and maximum useable frequencies between two locations over aspecified 24 hour period

Radio Explorer -- By DmitryNefedov -- Graphic viewer for shortwave radio broadcasting schedules. Displaysdata in a tree-like expanding table, on a 24-hour Gantt chart, and on a worldmap with greyline and frequency coloring. Developed in Java and runs withmultiple operating systems including Windows and Linux. Can be installed with asingle click on a web page link via Java Web Start.

Aurora Blades Mac Os X

Skywave Technologies -- Propagation Tutorial & Programs

TWOHOPS -- calculates propagation statistics of one and two hop radio paths, including elevation angles.

VOACAP -- Voice of America - Propagation Prediction Program -- Also see below

VOACAP Quick Guide -- by JariPerkiömäki, OH6BG -- Free - A half a year's work in understanding how VOACAPreally works. It provides easy steps to select the right input values along withdiscussions and case studies. If you are using ACE-HF, WinCAP Wizard or MultiNECwith VOACAP, this Guide provides you with the basic knowledge so that you canutilize those products to their full capacity.

W6ELProp™-- By Sheldon C. Shallon, W6EL - predicts ionospheric (sky-wave) propagationbetween any two locations on the earth on frequencies between 3 and 30 MHz.

THE AURORA PAGES

Aurora Photo Index -- From 'Your Remote S-Meter' Pages

CAN'T FIND IT? SEARCH THE WEB OR THE AC6V WEBSITE

GO BACK TO THE BIG INDEX

GO BACK TO THE QUICK INDEX

AC6V BRAG TAPE

Last Update:January 17, 2010

Released: March 13, 2020

System requirements: macOS 10.9 Mavericks through 10.15 Catalina

Revision History

Version 1.0 Build 58K BETA March 3, 2020
1. Aurora(n)-TB, Aurora(n)-TB3, Hilo-TB, Hilo-TB3 now have the sample rate and sync source read from the device upon driver load so the device retains the sample rate and sync source, not the driver. This prevents a cable disconnection from overriding the sample rate or sync source stored on the device.
2. Lynx Mixer > Settings > Advanced > Adapter Settings > Channel Mode now controls the number of channels shown for a classic Aurora 8-TB where previously it was fixed at 16-channels. Channel Mode in Lynx Mixer for classic Aurora 8-TB now allows 2 thru 16-channels to be selected.

Version 1.0 Build 58J BETA February 17, 2020
1. Added support for DB-ADAT connected to LM-DIG inside Aurora(n).
2. Added NControl to driver package.
2.1 Supports DB-ADAT.
2.2 Fixes issue with Mic Pre not showing Gain when in Hi-Z mode.
2.3 Fixes issue with About box not showing driver version info properly.
3. Changed to “Packages.app” for installer to allow for notarization on Catalina.
4. Added register update after card info write to prevent streaming issues after an EEPROM write.
5. Saves Hardware Payload Size in EEPROM instead of MixerState.xml so it is restored properly if the device is plugged in or turned on after the Mac has started.
6. Lynx Mixer now shows and can select clock sources for LM-DIG and/or DB-ADAT with Firmware 1.21 on Aurora(n).
7. Changed smallest Hardware Payload Size when on “Auto” to 8 (from 4).
8. Added NControl 1.0.0 to driver installation package. NControl will be installed into the /Applications folder and will automatically be launched if the user launches Lynx Mixer with an Aurora(n)-TB3 (which doesn’t support Lynx Mixer).

Version 1.0 Build 58I BETA November 14, 2019
1. Fixed issue with CARDID read on driver load that might cause firmware updates to timeout.

Version 1.0 Build 58H BETA October 10, 2019
1. Fixed issue with Lynx Mixer not allowing mute changes for sources to anything other than Out 1&2 (introduced on 58G).

Version 1.0 Build 58G BETA September 20, 2019
1. Driver and all applications are 64-bit and notarized by Apple for Mojave (10.14) and Catalina (10.15) and up.
2. Changed interface for FWUpdate to 64-bit. Older versions of FWUpdate will no longer function.
3. Sample offset fixed for Aurora(n)-TB. Added one sample for play and one sample for record.
4. Now includes Hilo Remote 1.0.19.
4.1. Hilo Remote no longer automatically resizes the window based on the number of channels.
4.2. Added “Advanced” menu option of connection method is Thunderbolt which may contain the following menu options depending on hardware configuration:
4.2.1. Added “Adapter Settings” dialog to allow adapter settings previously only available with Lynx Mixer to be changed with Hilo Remote.
4.2.2. Please note: This setting is for advanced use and normally should never need to be changed by the end user. Added “Hardware Payload Size”. This should normally be left on “Auto” to allow the driver to determine the payload size (see note 5 below).
4.2.3. Please note: This setting is for advanced use and normally should never need to be changed by the end user. Added “Show PCIe DMA Completion Latency”. This option will temporarily display the PCI Express DMA completion latency on the toolbar while streaming. This setting is not saved so each launch of Hilo Remote will have this option unchecked. The latency value can be used in conjunction with the Settings > Advanced > Hardware Payload Size to insure glitch free streaming. The current maximum value will be displayed in both microseconds and samples (adjusted for the current sample rate). The Hardware Payload Size should always be double the worst-case latency number in samples. The software buffer size should always be a minimum of 4 times the Hardware Payload Size.
5. Changed how the Hardware Payload Size is automatically calculated. Perfect video poker strategy. The default values are 8 samples for 44.1kHz and 48kHz; 16 for 88.2kHz and 96kHz; and 32 for 176.4kHz and 192kHz. If Advanced > Hardware Payload Size is set to “Auto”, each time the streaming is stopped, the driver evaluates the computers performance and may set a new default Hardware Payload Size if the driver based on the that performance measurement. This may result in either a higher Hardware Payload Size being selected, or a lower Hardware Payload Size depending on the speed of the computers PCIe DMA Completion Latency value.
6. In Lynx Mixer: Changed “Hardware Buffer Size” to “Hardware Payload Size” to keep it from being confused with the software buffer size. This should normally be left on “Auto” to allow the driver to determine the payload size (see note 5 above).
7. Please note: This setting is for advanced use and normally should never need to be changed by the end user. In Lynx Mixer: Added “Show PCIe DMA Completion Latency”. This option will temporarily display the PCI Express DMA completion latency on the toolbar while streaming. This setting is not saved so each launch of Lynx Mixer will have this option unchecked. The latency value can be used in conjunction with the Settings > Advanced > Hardware Payload Size to insure glitch free streaming. The current maximum value will be displayed in both microseconds and samples (adjusted for the current sample rate). The Hardware Payload Size should always be double the worst-case latency number in samples. The software buffer size should always be a minimum of 4 times the Hardware Payload Size.
8. In Lynx Mixer: Added the ability to change the Sync Source on the Aurora(n)-TB. Please note that Firmware 6.4 is required on the LT-TB for this to function properly.

Version 1.0 Build 58E BETA March 1, 2019
1. Driver and all applications are now notarized by Apple for Mojave (10.14) and up.
2. Changed name of Hilo with LT-TB from “LT-TB” to “Hilo-TB”.
3. All applications are now 64-bit to avoid warning on Mojave.
4. Transmit FIFO full check now performed for internal MIDI connection on LT-TB.
5. Sample offset fixed for LT-TB 5.5 firmware.

Version 1.0 Build 58D November 14, 2017
1. Added support for Aurora⁽ⁿ⁾ with LM-DIG board.
2. Fixed issue for startup scene on certain configurations.
3. Driver now supports macOS 10.9 to macOS 10.14.

Aurora Blades Mac Os 11

Version 1.0 Build 58C June 2, 2017
1. Added support for Aurora⁽ⁿ⁾-TB.

Version 1.0 Build 58B May 16, 2016
1. Added work-around for issue with DMAV2PLUS that would occasionally cause dropped samples on input.
2. Added support for fixed recording timing DMAV2PLUS firmware:
AES16e: 14.1
LT-TB: 6.2
E44/E22: 2.1
3. Added support for non-mixable integer format. This allows applications to bypass the Float32 to SignedInt32 conversion (which is bit-perfect, so there is no sonic difference either way).
4. Includes Hilo Remote Version 1.0.12.
5. Added new signing certificate for OS X 10.9 and up.
6. Driver now supports OS X 10.9 to OS X 10.11.

Version 1.0 Build 58 August 27, 2015
1. Added support for DMAV2PLUS for AES16e/LT-TB/E44/E22.
DMAV2PLUS supports the following features:
– Smaller transfer sizes to reduce latency to under 1ms round-trip (96kHz, 32 sample buffer)
DMAV2PLUS is supported with the following firmware:
AES16e: 14.0
LT-TB: 6.0
E44/E22: 2.0
2. Added new controls in Lynx Mixer to support DMAV2PLUS. Settings > Advanced > Hardware Buffer Size. This settings should be left at ‘Auto’ unless you are working with Lynx Technical Support on a specific issue. Changing this control sets the amount of audio buffered in the hardware. The smaller the number the faster the CPU must respond to interrupts before audio breaks up.
3. Includes Hilo Remote Version 1.0.11.